# Apalike Latex Bibliography Environment

In most cases, you will use a environment to enclose the list of literature citations used in your thesis. However, if you would like to include useful works that you have not actually cited, you should use a environment instead.

If you are using BibTeX to extract the references from one or more bibliographic databases, use these commands inside the environment:

\begin{References} \bibliography{, , ...} \bibliographystyle{} \end{References}

The arguments to the command are the names of your bibliographic databases, separated by commas.

The argument to the command specifies how you want to format your references.

Here is an example. Suppose you are writing an article on geopataphysics, and you have two bibliographic database files named and , and you are using the American Psychology Association style.

\begin{References} \bibliography{georefs, patarefs} \bibliographystyle{apalike} \end{References}

Be sure to use the correct workflow for LaTeX documents using BibTeX: process the document once through , then once through , and then twice more through , to be sure the references are correctly linked to the text.

If you want to include works defined in the bibliography that you have not cited, place this command somewhere in the body of your text, and all the works will be displayed in the bibliography:

\nocite{*}

### Warning

You must have at least one or in the body of the text to produce a section, because LaTeX will include only the references from your file that you actually cite. If you don't cite any references, the command will produce this error message:

LaTeX Error: Something's wrong--perhaps a missing \item.

An alternative to BibTeX is to place your reference entries directly in the document. Here is the general form:

\begin{References} \begin{thebibliography} \bibitem … \bibitem … … \end{thebibliography} \end{References}

In the text that follows each command, any additional formatting must be done with explicit commands. For example, if you prefer to italicize a journal title, you must enclose it in a or similar command.

## Learn how to create a bibliography with Bibtex and Biblatex in a few simple steps. Create references / citations and autogenerate footnotes.

Tweet

[View example on Overleaf]

1. Creating a .bib file
2. Using BibTeX
3. Autogenerate footnotes with BibLaTeX
4. BibTeX Format
5. BibTeX Styles

We have looked at many features of LaTeX so far and learned that many things are automated by LaTeX. There are functions to add a table of contents, lists of tables and figures and also several packages that allow us to generate a bibliography. I will describe how to use bibtex and biblatex (both external programs) to create the bibliography. At first we have to create a .bib file, which contains our bibliographic information.

## Creating a .bib file

A .bib file will contain the bibliographic information of our document. I will only give a simple example, since there are many tools to generate the entries automatically. I will not explain the structure of the file itself at this point, since i suggest using a bibtex generator (choose one from google). Our example will contain a single book and look like this:

@BOOK{DUMMY:1, AUTHOR="John Doe", TITLE="The Book without Title", PUBLISHER="Dummy Publisher", YEAR="2100", }

If you don't want to use a BibTeX generator or a reference management tool like Citavi (which generates BibTeX files automatically for you), you can find more examples of BibTeX formats here.

## Using BibTeX

After creating the bibtex file, we have to tell LaTeX where to find our bibliographic database. For BibTeX this is not much different from printing the table of contents. We just need the commands \bibliography which tells LaTeX the location of our .bib file and \bibliographystyle which selects one of various bibliographic styles.

\documentclass{article} \begin{document} Random citation \cite{DUMMY:1} embeddeed in text. \newpage \bibliography{lesson7a1} \bibliographystyle{ieeetr} \end{document}

By using this code, we will obtain something like this:

I named my .bib file lesson7a1.bib, note that I did not enter the .bib extension. For the style, I've choosen the ieeetr style, which is very common for my subject, but there are many more styles available. Which will change the way our references look like. The ieeetr style will mark citations with successive numbers such as [1] in this example. If I choose the style to apalike instead, i will get the following result:

Most editors will let you select, to run bibtex automatically on compilation. In TeXworks (MiKTeX) for example, this should be selected by default.

If you use a different editor, it can be necessary to execute the bibtex command manually. In a command prompt/shell simply run:

pdflatex lesson7a1.tex bibtex lesson7a1 pdflatex lesson7a1.tex pdflatex lesson7a1.tex

It is necessary to execute the pdflatex command, before the bibtex command, to tell bibtex what literature we cited in our paper. Afterwards the .bib file will be translated into the proper output for out references section. The next two steps merge the reference section with our LaTeX document and then assign successive numbers in the last step.

## Autogenerate footnotes in $\LaTeX$ using BibLaTeX

The abilities of BibTeX are limited to basic styles as depicted in the examples shown above. Sometimes it is necessary to cite all literature in footnotes and maintaining all of them by hand can be a frustrating task. At this point BibLaTeX kicks in and does the work for us. The syntax varies a bit from the first document. We now have to include the biblatex package and use the \autocite and \printbibliography command. It is crucial to move the \bibliography{lesson7a1} statement to the preamble of our document:

\documentclass{article} \usepackage[backend=bibtex,style=verbose-trad2]{biblatex} \bibliography{lesson7a1} \begin{document} Random citation \autocite[1]{DUMMY:1} embeddeed in text. \newpage \printbibliography \end{document}

The \autocite command generates the footnotes and we can enter a page number in the brackets \autocite[1]{DUMMY:1} will generate a footnote like this:

For BibLaTeX we have to choose the citation style on package inclusion with:

The backend=bibtex part makes sure to use BibTeX instead of Biber as our backend, since Biber fails to work in some editors like TeXworks. It took me a while to figure out how to generate footnotes automatically, because the sources I found on the internet, didn't mention this at all.

## BibTeX Formats

This is not meant to be a comprehensive list of BibTeX formats, but rather give you an idea of how to cite various sources properly. If you're interested in an extensive overview of all BibTeX formats, I suggest you to check out the resources on Wikibooks.

### Article

@ARTICLE{ARTICLE:1, AUTHOR="John Doe", TITLE="Title", JOURNAL="Journal", YEAR="2017", }

### Book

@BOOK{BOOK:1, AUTHOR="John Doe", TITLE="The Book without Title", PUBLISHER="Dummy Publisher", YEAR="2100", }

### Inbook (specific pages)

@INBOOK{BOOK:2, AUTHOR="John Doe", TITLE="The Book without Title", PUBLISHER="Dummy Publisher", YEAR="2100", PAGES="100-200", }

### Website

@MISC{WEBSITE:1, HOWPUBLISHED = "\url{http://example.com}", AUTHOR = "Intel", TITLE = "Example Website", MONTH = "Dec", YEAR = "1988", NOTE = "Accessed on 2012-11-11" }

This is a list of the formats that I have most commonly used. If you think some important format is missing here, please let me know.

## BibTeX Styles

Here's a quick overview of some popular styles to use with BibTeX.

### Plain

I'm trying to keep this list updated with other commonly used styles. If you're missing something here, please let me know.

## Summary

• Generate a bibliography with BibTeX and BibLaTeX
• First define a .bib file using: \bibliography{BIB_FILE_NAME} (do not add .bib)
• For BibTeX put the \bibliography statement in your document, for BibLaTeX in the preamble
• BibTeX uses the \bibliographystyle command to set the citation style
• BibLaTeX chooses the style as an option like: \usepackage[backend=bibtex, style=verbose-trad2]{biblatex}
• BibTeX uses the \cite command, while BibLaTeX uses the \autocite command
• The \autocite command takes the page number as an option: \autocite[NUM]{}

Next Lesson: Lesson 8